Quanzhou TESUNHO Electronics Co.,Ltd
Tel:86 595 2208 2266
Fax:86 595 2208 2266
The purpose of repeater design is to push your network signals so that they can be transmitted further.
Due to the influence of transmission line noise, the digital signal or analog signal carrying information can only transmit a limited distance.
The function of the repeater is to regenerate and transmit the received signal, thus increasing the distance of the signal transmission. It connects two or more network segments of the same network. The repeater can connect the cables of the two LAN, retime and regenerate the digital signals on the cable, and then send them out. These functions are the typical functions of the first layer of the OSI model, the physical layer.
As the technology developing, repeater concept was used by Tesunho Electronics in the PoC PTT walkie talkie. Please contact us for more information.
New Arrival 35W RF Power Amplifier TA-RPA01 is ready,
UHF or VHF for choose
Transmit and receiver can be switched
Easy to install
Please contact us for samples.